Aguilar

The SL 410x offers an unprecedented balance of performance and weight. In fact, at only 49 lbs. (22.23 kg), this compact cabinet is almost half the weight of a traditional 410 bass cabinet! This cabinet is available in 4 or 8 ohm configurations and can handle 800 watts RMS. It also features four custom-voiced woofers with Neodymium magnets and a phenolic tweeter with variable level control. With a frequency response of 44 Hz–16 kHz, the SL 410x provides the deep lows, articulate midrange and smooth treble for which Aguilar is known for. Power Handling: 800 watts RMS Frequency Response: 44 Hz – 16 kHz Sensitivity: 100.3 dB 1W 1M Phenolic tweeter with integral phase plug Custom crossover with variable tweeter control Impedance: 4 ohms Dimensions: 23 15/16” H, 21 15/16” W, 15 11/32” D Weight: 49 lbs Includes: Removable Casters Optional Padded Cover

The Filter Twin ® uses two identical filters sweeping in opposite directions – one up in frequency, one down in frequency – to give classic 70’s-inspired funk sounds or completely new and original filter tones. Two filters sweeping at the same time give you a more organic, vocal quality and allows you to get expressive new sounds that you can’t get from other pedals. The Filter Twin ® offers unique filter effects via an intuitive four-knob layout. The BLEND control allows you to adjust the mix between the filters. The THRESHOLD control determines how sensitive the unit is to different playing styles. The VELOCITY controls determine the speed of each filter.

Designed for small and medium sized venues, the SL 210 delivers a tight and punchy low-end with excellent midrange articulation. Weighing only 35lbs (15.42kg), this cabinet is both lightweight and portable without sacrificing any of the legendary “Aguilar Sound”. The SL 210 also pairs perfectly with our SL 115 for a massive powerhouse of tone! Features include two custom voiced 10” neodymium speakers and a phenolic tweeter with variable level control. Power handling is 400 watts RMS and this cabinet is the 8 ohm versions. Power Handling: 400 watts RMS Frequency Response: 44 Hz – 16 kHz Sensitivity: 97.3 dB 1W 1M Phenolic tweeter with integral phase plug Custom crossover with variable tweeter control Impedance: 8 ohms Dimensions: 17 5/8 H x 21 15/16 W x 15 11/32 D Weight: 35 lbs

ANALOG OCTAVE Every bass player wants deep, organic tone. The Octamizer ® creates a wide range of musical sounds an octave below your original note. The Octamizer ® features independent volume controls for both the Clean and Octave sounds, so dialing in the exact amount of each is a cinch. The two discrete signal paths also have their own tone controls that were specifically designed to enhance and expand their musical possibilities. The CLEAN TONE control uses a full spectrum tilt EQ, allowing for the boosting of treble while cutting bass or boosting of bass while cutting treble. This unique circuit allows you to create a clean sound that creates an octave doubling effect or to blend the sounds together for a great thick, snarky synth tone. The Octamizer’s OCTAVE FILTER control is a multi-pole low-pass Filter that lets you shape the octave sound from smooth and deep to edgy and aggressive. OCTAMIZER ® FEATURES Proprietary detector circuit for superior tracking Dual Filter Architecture Full Spectrum Tilt EQ for Clean sound Continuously variable multipole low-pass Filter for Octave sound Gig-saver bypass (signal passes even if your battery dies) Powered by one nine volt battery or optional universal power supply Heavy Duty steel construction Inputs: One 1/4″ jack Outputs: One 1/4″ jack Controls: Engage switch Warranty: Three year limited Optional: 9 volt power supply

The SL 115 offers incredible sonic flexibility whether used as a stand-alone cabinet or paired with another cabinet such as the SL 410x. Weighing only 34 lbs. (15.42 kg), this is a 4 ohm cabinet. With a frequency response of 35 Hz – 4 kHz, the SL 115 provides the deep lows, articulate midrange and smooth treble for which Aguilar is known. The SL 115 also features a custom-voiced woofer with Neodymium magnet and includes one Neutrik Speakon and two 1/4” inputs. Power Handling: 400 watts RMS Frequency Response: 35 Hz – 4 kHz Sensitivity: 99 dB 1W 1M Impedance: 4 ohms Dimensions: 19” H, 21 15/16” W, 15 11/32” D Weight: 34 lbs

Based on the popular Tone Hammer ® pedal, this superlight bass head combines 3 bands of flexible EQ, a colorful “Drive” control, and 500 watts of power in a 4 lb. package. The Tone Hammer ® 500 will give you the legendary “Aguilar Sound” while still fitting into the accessory pouch of most gig bags – the perfect choice for bass players on the go. Power Output: 500 watts into 4 ohms, 250 watts into 8 ohms Preamp Section: Solid State Power Section: Class D Transformer: Switching mode power supply (SMPS) EQ Section: Bass: +/- 17 dB @ 40 Hz Mid Level: +/- 16 dB Mid Frequency: 180 Hz – 1 kHz Treble: +/- 14 dB @ 4 kHz Drive Control: Fully adjustable, featuring Aguilar’s proprietary AGS (adaptive gain shaping) circuit Effects Loop: Series operation. Adds 6 dB of additional gain, making it useful for a broad range of effects units. Inputs: One 1/4″ input jack, compatible with all active and passive basses Speaker Outputs: Two Neutrik Speakon speaker outputs Balanced Output: XLR balanced output with pre/post EQ and ground lift switch Tuner output Cooling: Two high-quality whisper fans with thermal speed control Dimensions: 10.75”W X 8.5”D X 2.75”H Weight: 4 lbs Warranty: Three year limited

Giving the Tone Hammer ® 700 its flexible tone-shaping capabilities is Aguilar’s Tone Hammer preamp, the same preamp used in the Tone Hammer D.I./preamp pedal, which has become a favorite of bass players all over the world. The 4.9 lb. (2.22 kg) Tone Hammer 700 delivers 700 continuous watts @ 4 or 2.67 ohms, 350 watts @ 8 ohms and features bass, treble and fully sweepable midrange controls. The Drive control utilizes Aguilar’s proprietary AGS circuit which adds subtle distortion and midrange punch to the sound. The Tone Hammer 700 also features a series effects loop, XLR balanced output and two rear panel speakon outputs. Universal mains means that this amp is ready to travel anywhere in the world – just plug and play!

The AG 700 has the clarity, dynamic range and fast transient response of the legendary AG 500 with a big low-end and high headroom. This solid state amplifier provides 700 continuous watts at 4 ohms while only weighing 4.9 lbs. (2.22 kg)! Boasting an incredibly flexible EQ section, the AG 700 features controls for Treble, High Mid, Low Mid and Bass along with Deep and Bright EQ switches for a broadband boost. The AG 700 also features a series effects loop, XLR balanced output and two rear panel speakon outputs. Power Output: 700 watts @ 2.67 or 4 ohms, 350 watts @ 8 ohms Preamp Section: Solid State Power Section: Class D Transformer: Switching mode power supply (SMPS) EQ Section: Bass: +/- 17 dB @ 40 Hz Deep: +6 dB <250 Hz Low Mid: +/- 15 dB @ 300 Hz High Mid: +/- 14dB @ 800 Hz Treble: +/- 14 dB @ 4 kHz Bright: +6 dB >3 kHz, shelving -10dB input pad Tuner output Inputs: One 1/4″ input jack, compatible with all active and passive basses Speaker Outputs: Two Neutrik Speakon speaker outputs Effects Loop: Series operation. Adds 6 dB of additional gain, making it useful for a broad range of effects units Balanced Output: XLR balanced output with pre/post EQ and ground lift switch Cooling: Two high-quality whisper fans with thermal speed control Dimensions: 12″ W x 9″ D x 3″ H Weight: 4.9 lbs Warranty: Three year limited

This preamp/direct box is so strong and powerful it could only be called the “Tone Hammer”! Based on the respected OBP-3 preamp, the Tone Hammer ® features fully sweepable midrange frequencies in addition to bass and treble controls. With the Tone Hammer’s pristine D.I. you are set for the studio or the stage. To give this tone shaping unit the ultimate flexibility we introduce our proprietary Adaptive Gain Shaping circuitry (AGS). AGS allows the player to kick in an additional gain structure and EQ with the “stomp” of a button. You can now go from modern slap sounds to vintage or overdriven. 18 volt operation gives the Tone Hammer ® plenty of headroom to reproduce the most dynamic playing style. Separate GAIN and MASTER controls allow you to dial in just the right gain structure for any instrument. The Tone Hammer ® is the essential preamp/direct box for every bassist’s tool box.

The first lightweight bass cabinet with no compromise in tone. At only 25 lbs. (11.34 kg), the SL 112 represents an entirely new path to the world-class Aguilar tone featuring a Neodymium driver with a custom-designed crossover. Power Handling: 250 watts RMS Frequency Response: 37 Hz – 16 kHz Sensitivity: 99.9 dB 1W 1M Phenolic tweeter with integral phase plug Custom crossover with variable tweeter control Impedance: 8 ohms Dimensions: 14 7/8″ H, 19″ W, 18″ D Weight: 25 lbs

The SL 115 offers incredible sonic flexibility whether used as a stand-alone cabinet or paired with another cabinet such as the SL 410x. Weighing only 34 lbs. (15.42 kg), this SL 115 is the 8 ohm versions and can handle 400 watts RMS. With a frequency response of 35 Hz – 4 kHz, the SL 115 provides the deep lows, articulate midrange and smooth treble for which Aguilar is known. The SL 115 also features a custom-voiced woofer with Neodymium magnet and includes one Neutrik Speakon and two 1/4” inputs. Power Handling: 400 watts RMS Frequency Response: 35 Hz – 4 kHz Sensitivity: 99 dB 1W 1M Impedance: 8 ohms Dimensions: 19” H, 21 15/16” W, 15 11/32” D Weight: 34 lbs

The TLC Compressor ® is designed to give musicians the ability to control their dynamics in a flexible and musical way, making it an invaluable musical tool for both recording and live use. Our proprietary Trans Linear Control (TLC) circuit enables us to achieve unprecedented levels of performance in a small package. The TLC Compressor ® features a four-knob layout to provide a full set of important features. Using a wide range of attack times and variable threshold and slope levels, you’ll be able to dial in just the right sound. Aguilar’s TLC Compressor ® gives you a range of control usually found only in expensive studio compressors.

The Tone Hammer ® 350 makes a big sound while having a tiny footprint! Boasting a 3 band EQ and 350 watts of power, this little beast gives you classic Aguilar tone in an easy to carry, 3 lb. package! Players on a budget can now have it all – tone, power and portability! Plus, it’s assembled at the Aguilar factory in NYC. Power Output: 350 watts into 4 ohms, 175 watts into 8 ohms Preamp Section: Solid State Power Section: Class D Transformer: Switching mode power supply (SMPS) Tuner output EQ Section: Bass: +/- 17 dB @ 40 Hz Mid Level: +/- 16 dB Mid Frequency: 180 Hz – 1 kHz Treble: +/- 14 dB @ 4 kHz Drive Control: Fully adjustable, featuring Aguilar’s proprietary AGS (adaptive gain shaping) circuit. Inputs: One 1/4″ input jack, compatible with all active and passive basses -10dB input pad Speaker Output: Neutrik Speakon Balanced Output: XLR balanced output with pre/post EQ and ground lift switch Cooling: One high-quality whisper fan with thermal speed control Dimensions: 8.25″ W x 7.5″ D x 2.75″ H Weight: 3 lbs Warranty: Three year limited Optional: Durable carrying bag